Steps to Apply Black and Pink Wallpaper on Your Wall

published on 17 June 2021
Black and Pink Wallpaper-cl6ed

The decoration of walls with elegant wallpapers is a  great way to add color, texture, and personality to your home. Choose a wall  and add black and pink wallpaper to create maximum impact when you enter  the room. You can create a distinctive wall in your entryway, bedroom, living  room, or dining room. There are so many possibilities!

If you are a comfortable person, you will probably have  no trouble hanging your wallpaper. However, here are some pointers to help you  hang wallpaper and create beautiful walls with features.

Tools and Equipment Required

You will need glue, place, measuring tape, cutting  knife, steel ruler, brush, soft towels, paint roller, and many more.

Preparation

Your walls should be clean, smooth, and dry. So clean  your old wall effectively and get rid of the dust, dirt, and grime. The washing  of your walls with sugar soap and one of those big greasy orange or yellow  sponges you use to wash your car is a great way to clean them. You need to  eliminate any deviations. Apply grease to each hole. Always remove the old wall  covering before installing new wallpaper.

Prepare the Glue and Paste

Most glue and paste mixtures take some time to harden  before they are applied to the wallpaper. So prepare the mixture in advance to  save time. In addition, you need to follow the directions on your package that  comes with glue and a stick.

Usually, the paste should be applied to the back of the  wallpaper. The glue is applied on the wall at the border around the point where  the edge of the wallpaper will be applied.

Measure and Cut the Wallpaper

This is the toughest step when you have a pattern that  needs to be repeated and adjusted. Always make sure you should have enough  wallpaper to make an accidental mistake.

You need to measure the height of your wall  adequately.  Leave an additional 5 cm for trimming purposes. Unroll the wallpaper and mark  where you need to cut it. Cut the paper carefully with a square knife or a steel  ruler, or a large spirit level. You can roll up more wallpapers and customize the pattern.

Cut the wallpaper and discard the unmatched part. You  need to continue measuring, adjusting, and cutting the wallpaper until you  have  all the pieces to complete your wall. Mark the dots vertically on your wall so  that you can check that they are in a straight line when you hang the  wallpaper.

Apply Glue

One can use a paint roller to apply the paste to the  back of the wallpaper from top to bottom. After applying the paste, fold the  wallpaper itself and again until it is only about 30 cm wide. You need to place  it in a large plastic trash bag and set it aside for 30 minutes to allow the  paste to soak into the wallpaper.

Continue with each strip of wallpaper. An individual  needs to fold the wallpaper until it fits in a plastic bag or trash bag. You  need to remove the air from the plastic bag and seal tightly to prevent the  wallpaper from drying out. It will take some time before you can hang the last  piece of tape.

After waiting for the proper time, it takes some  minutes your paste to harden, apply glue to the wall in the frame around where  the edges of the wallpaper will be. Use the marks created earlier to guide you.  Your border should be about 3 to 4 inches wide.

Apply Black and Pink Wallpaper

You can start from the top and usually work from left  to right. Do not forget to add an extra 5 cm for trimming on the top side. Use  your hands and a soft sponge to smooth the wallpaper on the walls. You can use  a soft cloth to remove excess glue from the edges.

Read more

Make your website with
Unicorn Platform Badge icon